| Process | Material | Grade | Name | Feature | Application |
| CNC machining | Aluninium | Al 7075 | Al 3.4365 | EN-AW7075 | Al-Zn6MgCu | High strength ? High toughness ? antifatigue ? High machinability | Widely used in structural parts of aircraft |
| Al 6061 | Al 3.3211 | EN-AW6061 | Al-Mg1SiCu | High Strength ? Good Weldability | Suitable for high load structures, such as scaffolding, railway passenger cars, machinery and aerospace components | ||
| Al 6060 | Al 3.3206 | EN-AW6060 | Al-MgSi | Low strength ? heat treatable? Good Weldability ? Good corrosion resistance | Suitable for the production of lighting, furniture, flooring and other engineering applications without special requirements for strength | ||
| Al 6082 | Al 3.2315 | EN-AW6082 | Al-Si1Mg | Good thermal conductivity ? High resistance to stress corrosion cracking | Widely used for offshore construction and containers | ||
| DIN Al-Cu alloy | Al 3.1645 | EN AW–2007 | 3.1645 | AlCuMgPb | Weldable ? Strong ? Anodized | Usually used to produce machine parts, bolts and nuts | ||
| Steel | S355J2G3 | 1.0570 | St52-3 | High Tensile ? Low thermal conductivity | ? | |
| S45C | 1.0503 | AF65C45 | High Tensile ? Low ductility ? Low thermal conductivity | Used for screws, forgings, drills, shafts, etc | ||
| 1.7225 | 1.7225 | 42CrMo4 | High Strength ? High toughness? ? Impact-resistance | Widely used in the manufacture of machinery, axles, gear shafts, wheels and baseboards, also used in the production of large plastic molds | ||
| 16CrMnH | 1.7131 | 16MnCr5 | High surface hardness and wear resistance | Ideal material for manufacturing gear, worm, bushing and other mechanical parts | ||
| Q235A | 1.0038 | EN 10025 | S235JR | Good plasticity ? High toughness? ? Good Weldability | Widely used in Bridges, transmission towers and so on | ||
| Stainless steel | 0Cr18Ni12MoTi | SS 1.4571 | X6CrNiMoTi17-12-2 | Excellent corrosion resistance ? Low hardenability ? Excellent durability | Used as plates, tubes,pipes or bar | |
| SUS 316L | SS 1.4404 | 316L | X2CrNiMo17-12-2 | Good heat resistance ? Corrosion resistance | Used in food processing equipment, Marine fittings, bolts, nuts and springs | ||
| 0Cr19Ni9 | SS 1.4301 | X5CrNi18.10 | Excellent corrosion resistance ? Low thermal conductivity? Good Machinability | Used for kitchen equipment such as pans, pipes, sinks, etc | ||
| Copper | Cu 2.0065 | E-Cu58Ms58 | high conductivity ? Good Machinability | Widely used in electrical/electronics industry | |
| Cu 2.0060 | Cu-ETP | high conductivity ? Good Machinability ?Excellent weldability ? Excellent formability | Used for bus bar, motor, winding and other general electrical components | ||
| Titanium | Ti – TA5 | Ti 3.7164 | 5 grade Ti | 6Al-4V9 | Good strength ? Easy to process | Used in subsea oil and gas structures | |
| Ti – TA2 | Ti 3.7035 | 2 grade Ti | Excellent specific strength ? Good corrosion resistance | The structure for weight reduction is also suitable for the medical field | ||
| Polymer | UHMW PE | Ultrahigh molecular weight polyethylene | Self-lubricating ? Wear resistance ? Corrosion resistance | Used for conveyor rail, wear pad, chemical tank, etc | |
| PTFE | Teflon | Smooth and resistant to extreme temperatures | Widely used in the production of gears, bushings, skateboards, piston rings, etc | ||
| POM | Dierlin, acetal | Durable ? Robust ? Wear resistance, creep resistance, warping resistance | Used in a wide range of industrial and mechanical parts, such as pumps, valves, bearings, accessories, etc | ||
| Acrylic | PMMA | Tough ? Resistant to weather/chemical environments | For transparent applications such as Windows, frames, etc | ||
| PEEK | Polyether ether ketone | Hard???Rigid???Chemical environment resistance/fatigue resistance | It is used to produce components such as tubes, bearings, seals, valves, electrical insulators and even medical implants | ||
| PC | PC (polycarbonate) | Transparent ? Durable ? Resistant to fragmentation | For applications that require transparent and strong materials, such as eyeglass lenses | ||
| ABS | ABS(acrylonitrile-butadiene-styrene) | High toughness? ?Rugged ? Impact/scratch resistant | Used in manufacturing, automotive and Marine industries |